-
Both the Neck and body are Musikraft. The neck is a chunky D 60′s style, veneer board, 90/10 wide with clay dots, 7.25 radius with medium jumbo frets. Body is one-piece swamp ash. Both were finished by MJT Aged Finishes in thin nitro. I then reliced the body with heavy checking and also routed for HH. The Lake Placid Blue finish has a nice aged and slightly yellowed look to it. The pickups are 2017 Fender USA loaded Texas special HSS – Fender atomic humbucker in the bridge with Texas Special single coils in the neck and middle with Greasebucket tone circuit. Aged white Fender knobs with Fender three ply pickguard. Neck plate is vintage style stamped with a serial #.
Neck specs:
Build a Strat® 2 PC Constructed Neck
ORIENTATION: Right for Right Handed Players
SCALE LENGTH: 25.5 Standard Fender
NUMBER OF FRETS: 21 Fret
NUT WIDTH: 1-5/8 (41.28mm)
HEEL WIDTH: 2-3/16 (55.56mm) Standard Fender
TUNER HOLE SIZE: 11/32 Vintage Kluson
TRUSS ROD TYPE: Dual Acting with Vintage Double Slotted Adjustment Nut at the Heel
FB RADIUS: 7-1/4
12TH DOT SPACING: Wide (Vintage Pre 64)
NUT SLOT STYLE: 1/8 Standard Fender Flat Bottom Style
SHAFT WOOD: Rock Maple
FB WOOD: Indian Rosewood Dark +$25
FB STYLE: Veneer Vintage Fender (21 Fret Only) Will Come With 50/50 Side Dots + $30
TOP DOTS: Imitation Clay
CUSTOM INLAY: None Use Dot Inlay Selected Above
SIDE DOTS: Imitation Clay 2mm
SIDE DOT LOC: I have Chosen the Veneer FB option above and it comes with 50/50 Split
FRET WIRE SIZE: 6150 Medium Jumbo Nickel Silver
FB EDGES: Semi Rolled Standard
BACK PROFILE: Chunky D 90 10
BINDING: None
FINISH: Thin Lacquer Sealer + $20
FB FINISH: Apply Oil Finish (Rosewood Boards Only) + $25
MOUNTING HOLES: Drill Holes Standard Fender Pattern
NUT INSTALLATION: Install TUSQ Nut + $35